Original file

Volkswagen pcmflash Bosch EDC17CP44 4G0907401AA / 10SW022694

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Volkswagen pcmflash, hardware number 4G0907401AA and software number 10SW022694, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen pcmflash
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4G0907401AA
Software number
10SW022694
Vehicle maker's hardware number
4G0907401E

Technical data

Vehicle
BrandVolkswagen
Car modelpcmflash
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907401AA
Software number10SW022694
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyf01d9da98b4d7315
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW022694Offset in the file: 0x02001A
Vehicle maker's hardware number4G0907401EOffset in the file: 0x3323A4
Software / calibration4G0907401AA · version 0007Offset in the file: 0x3323BE
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1365//C1365DEAS///Offset in the file: 0x0481A0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907401AA and software number 10SW022694. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G09074014G0907401Audi A6, Audi A8, Audi 8F
4G09074014G0997401Audi A6
4G09074014H0907401Audi A6
4G0907401AA10SW000029Volkswagen pcmflash
4G0907401AA10SW028743Volkswagen pcmflash
4G0907401B1037514661Audi A7 3.0 TDI, Audi A 3.0 TDI
4G0907401B1037518188Audi A6 3.0 TDI, Audi pcmflash, Audi A6
4G0907401D1037528340Audi pcmflash, Audi A6

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page