Original file

Audi A6 Bosch EDC17CP44 4G0907401D / 1037561525

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi A6, hardware number 4G0907401D and software number 1037561525, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A63.0 diesel · 244.7PS / 180.0kW
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4G0907401D
Software number
1037561525
Vehicle maker's hardware number
4G0907401E

Technical data

Vehicle
BrandAudi
Car modelA6
Engine3.0 diesel
Power244.7PS / 180.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907401D
Software number1037561525
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameAudi A6 3.0 TDI EDC17CP44
File key63c468a359543886
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software1037561525Offset in the file: 0x02001A
Vehicle maker's hardware number4G0907401EOffset in the file: 0x31067A
Software / calibration4G0907401D · version 0006Offset in the file: 0x310694
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)35/1/EDC17_CP44/5/P985//C985CAFQ///Offset in the file: 0x045148

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907401D and software number 1037561525. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi pcmflashFlash4,096.00 KB€15Add to cart

All reads of 4G0907401D / 1037561525

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G0907401B1037514661Audi A7 3.0 TDI, Audi A 3.0 TDI
4G0907401B1037518188Audi A6 3.0 TDI, Audi pcmflash, Audi A6
4G0907401D1037528340Audi pcmflash, Audi A6
4G0907401D1037556932Audi pcmflash, Audi A6
4G0907401E007663Audi A6 3.0 V6 TDI CR
4G0907401E012939Audi A8 3.0 TDI CR DPF V6
4G0907401E049334Audi A4 3.0 TDI, Audi A6 3.0 TDI
4G0907401E052361Audi A6 3.0 TDI CR DPF, Audi A5, Audi A6

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page