Original file

Audi A6 3.0 V6 TDI CR Bosch EDC17CP44 4G0907401E / 007663

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi A6 3.0 V6 TDI CR, hardware number 4G0907401E and software number 007663, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A6 3.0 V6 TDI CR3.0 diesel 218.0PS / 160.3kW
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4G0907401E
Software number
007663
Bosch part / software
10SW007663
Software / calibration
4G1907401

Technical data

Vehicle
BrandAudi
Car modelA6 3.0 V6 TDI CR
Engine3.0 diesel 218.0PS / 160.3kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907401E
Software number007663
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key9ed41b5717208cbe
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW007663Offset in the file: 0x02001A
Vehicle maker's hardware number4G0907401EOffset in the file: 0x328068
Software / calibration4G1907401 · version 0005Offset in the file: 0x328082
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1247//C1247CDF9///Offset in the file: 0x044528

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907401E and software number 007663. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G0907401B1037518188Audi A6 3.0 TDI, Audi pcmflash, Audi A6
4G0907401D1037528340Audi pcmflash, Audi A6
4G0907401D1037556932Audi pcmflash, Audi A6
4G0907401D1037561525Audi pcmflash, Audi A6
4G0907401E012939Audi A8 3.0 TDI CR DPF V6
4G0907401E049334Audi A4 3.0 TDI, Audi A6 3.0 TDI
4G0907401E052361Audi A6 3.0 TDI CR DPF, Audi A5, Audi A6
4G0907401E052604Audi Q5 3.0 TDI CR DPF

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page