Original file

Audi Q5 Bosch EDC17CP44 4G0907401E / 1037540673

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi Q5, hardware number 4G0907401E and software number 1037540673, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q53.0 diesel 258PS
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4G0907401E
Software number
1037540673
Software / calibration
8K5907401Q

Technical data

Vehicle
BrandAudi
Car modelQ5
Engine3.0 diesel 258PS
Power258.0PS / 189.8kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907401E
Software number1037540673
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key8db4a8eaf7faf1e6
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software1037540673Offset in the file: 0x28301A
Vehicle maker's hardware number4G0907401EOffset in the file: 0x326780
Software / calibration8K5907401Q · version 0004Offset in the file: 0x32679A
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1247//C1247CD63///Offset in the file: 0x284630

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907401E and software number 1037540673. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi Q5Flash4,096.00 KB€15Add to cart
Audi Q5Flash4,096.00 KB€15Add to cart
Audi Q5Flash4,096.00 KB€15Add to cart
Audi Q5Flash4,096.00 KB€15Add to cart
Audi Q5 3.0 TDIFlash8,192.00 KB€15Add to cart

All reads of 4G0907401E / 1037540673

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G0907401E1037536632Audi A7 3.0 TDI CR DPF, Audi A6, Audi A8 2015y
4G0907401E1037536634Audi Q5
4G0907401E1037538061Audi A8, Audi A8 3.0 TDI CR DPF V6, Audi A8 3.0 TDI
4G0907401E1037540607Audi A8, Audi A8 3.0 TDI CR
4G0907401E1037543432Audi Q5 3.0 TDI CR
4G0907401E1037544660Audi A7 3.0 TDI CR, Audi A6
4G0907401E1037544675Audi A8
4G0907401E1037544676Audi A5 3.0TDI

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page