Original file

Audi A8 Bosch EDC17CP44 4G0907401E / 1037544675

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi A8, hardware number 4G0907401E and software number 1037544675, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A83.0 diesel
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4G0907401E
Software number
1037544675
Software / calibration
4H0907401F

Technical data

Vehicle
BrandAudi
Car modelA8
Engine3.0 diesel
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907401E
Software number1037544675
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameAudi A8 3.0 TDI EDC17CP44
File keya2d7108759a93ccc
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software1037544675Offset in the file: 0x02001A
Vehicle maker's hardware number4G0907401EOffset in the file: 0x335A0C
Software / calibration4H0907401F · version 0008Offset in the file: 0x335A26
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1106//C1106DBBR///Offset in the file: 0x04582C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907401E and software number 1037544675. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G0907401E1037540607Audi A8, Audi A8 3.0 TDI CR
4G0907401E1037540673Audi Q5, Audi Q5 3.0 TDI
4G0907401E1037543432Audi Q5 3.0 TDI CR
4G0907401E1037544660Audi A7 3.0 TDI CR, Audi A6
4G0907401E1037544676Audi A5 3.0TDI
4G0907401E1037545187Audi A6, Audi A7, Audi A7 3.0 TDI CR
4G0907401E1037545608Audi A8, Audi A8 3.0 TDI, Audi A8 3.0 TDI Quattro - 243hp
4G0907401E1037547198Audi A7, Audi A8

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page