Original file

Audi A6 Bosch EDC17CP44 4G0907401E / 1037564066

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi A6, hardware number 4G0907401E and software number 1037564066, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A63.0 diesel · 217.5PS / 160.0kW
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4G0907401E
Software number
1037564066
Software / calibration
8K5907311C

Technical data

Vehicle
BrandAudi
Car modelA6
Engine3.0 diesel
Power217.5PS / 160.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907401E
Software number1037564066
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameAudi A6 3.0 TDI EDC17CP44
File keyea5a7e93ea2d6a4b
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software1037564066Offset in the file: 0x02001A
Vehicle maker's hardware number4G0907401EOffset in the file: 0x312AD2
Software / calibration8K5907311C · version 0003Offset in the file: 0x312AEC
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1350//C1350BAM0///Offset in the file: 0x0461EC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907401E and software number 1037564066. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A5Flash4,096.00 KB€15Add to cart

All reads of 4G0907401E / 1037564066

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G0907401E1037556933Audi A6, Audi A7
4G0907401E1037561526Audi A6, Audi A6 3.0 TDI
4G0907401E1037561856Audi A6
4G0907401E1037561895Audi A5
4G0907401E1037564067Audi A4, Audi A5 3.0 TDI
4G0907401E1037564406Audi A5, Audi A7 3.0 TDI CR DPF
4G0907401E1037564425Audi A4, Audi Q5 3.0 TDI CR DPF
4G0907401E1037564430Audi A8 3.0 TDI, Audi A8

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page