Original file

Audi A6 Bosch EDC17CP44 4G0907401E / 4G1907401

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi A6, hardware number 4G0907401E and software number 4G1907401, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A63.0 diesel · 218.0PS / 160.3kW
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4G0907401E
Software number
4G1907401
Bosch part / software
10SW007663

Technical data

Vehicle
BrandAudi
Car modelA6
Engine3.0 diesel
Power218.0PS / 160.3kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907401E
Software number4G1907401
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key517a57b317103e14
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW007663Offset in the file: 0x28301A
Vehicle maker's hardware number4G0907401EOffset in the file: 0x328068
Software / calibration4G1907401 · version 0005Offset in the file: 0x328082
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1247//C1247CDF9///Offset in the file: 0x284630

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907401E and software number 4G1907401. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G0907401E10SW082107Audi Q5
4G0907401E10SW084646Audi A8
4G0907401E10SW084654Audi A8
4G0907401E4G0907401EAudi A5, Audi A6, Audi A4
4G0907401E4H0907401HVolkswagen Touareg V6 DPF BlueMotion
4G0907401F1037513666Audi A7, Audi A6 3.0 TDI, Audi A6
4G0907401F1037515579Audi A7, Audi A6, Audi A6 3.0 TDI (245) Quattro S-Tronic -
4G0907401F1037518146Audi A6, Audi A7, Audi A7 3.0 TDI

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page