Original file

Audi A6 Bosch EDC17CP44 4G0907401Q / 1037556953

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi A6, hardware number 4G0907401Q and software number 1037556953, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A63.0 diesel 244PS
Control unit
Bosch EDC17CP44
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
4G0907401Q
Software number
1037556953
Vehicle maker's hardware number
4G0907401

Technical data

Vehicle
BrandAudi
Car modelA6
Engine3.0 diesel 244PS
Power244.7PS / 180.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907401Q
Software number1037556953
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye471c78ba607f6b8
Identification read from the file
ECU nameEDC17CP44
Read typeCalibration only (data set)
Bosch part / software1037556953Offset in the file: 0x14001A
Vehicle maker's hardware number4G0907401Offset in the file: 0x19BBDE
Software / calibration4G0907401Q · version 0004Offset in the file: 0x19BBF8
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1071//C1071B0BH///Offset in the file: 0x140A14

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907401Q and software number 1037556953. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A6Flash4,096.00 KB€15Add to cart
Audi A6Flash4,096.00 KB€15Add to cart
Audi A6Flash4,096.00 KB€15Add to cart
Audi A6Flash2,048.00 KB€15Add to cart
Audi A6Flash4,096.00 KB€15Add to cart
Audi A6 3.0 TDI (245) Quattro S-Tronic - 245hpFlash4,096.00 KB€15Add to cart
Audi A6 3.0 TDI CRFlash8,192.00 KB€15Add to cart
Audi pcmflashFlash4,096.00 KB€15Add to cart
Audi A6 3.0 TDI CR DPFFlash4,096.00 KB€15Add to cart
Audi 3.0 TDIFlash4,096.00 KB€15Add to cart

All reads of 4G0907401Q / 1037556953

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G0907401P1037556961Audi pcmflash, Audi A7
4G0907401Q1037524695Audi A6 3.0 TDI
4G0907401Q1037527031Audi A6, Audi A6 3.0 TDI, Audi A6 3.0 TDI (245) Quattro S-Tronic - 245hp
4G0907401Q1037542217Audi A6, Audi A6 3.0 TDI, Audi A6 3.0 TDI CR
4G0907401R1037556933Audi pcmflash
4G0907401R1037561526Audi pcmflash
4G0907401S1037525505Audi A7, Audi A6 3.0 TDI CR, Audi A7 3.0 TDI
4G0907401S1037556944Audi A7, Audi A7 3.0 TDI, Audi pcmflash

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page