Original file

Audi Q5 S Bosch EDC17CP44 4G0907589 / 1037561563

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi Q5 S, hardware number 4G0907589 and software number 1037561563, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q5 S3.0 diesel · 312.7PS / 230.0kW
Control unit
Bosch EDC17CP44
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
4G0907589
Software number
1037561563
Software / calibration
8K5907589

Technical data

Vehicle
BrandAudi
Car modelQ5 S
Engine3.0 diesel
Power312.7PS / 230.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907589
Software number1037561563
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key4a1327d9e323eff3
Identification read from the file
ECU nameEDC17CP44
Read typeCalibration only (data set)
Bosch part / software1037561563Offset in the file: 0x14001A
Vehicle maker's hardware number4G0907589Offset in the file: 0x1CA43A
Software / calibration8K5907589 · version 0007Offset in the file: 0x1CA454
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1243//C1243QBCN///Offset in the file: 0x141630

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907589 and software number 1037561563. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G09075891037536200Audi Q5 S, Audi SQ5, Audi Q5 S 3.0 TDI CR
4G09075891037536208Audi A6 CR 2013 Turbo
4G09075891037544652Audi SQ5, Audi SQ5 3.0 BiTDI, Audi Q5 S
4G09075891037558504Audi Q5 S, Audi SQ5, Audi Q5 S 3.0 BiTDI
4G09075891037564096Audi 8R 3.0 BiTDI, Audi Q5 3.0 BiTDI, Audi Q5 S SHIFTECH
4G0907589A1037522990Audi A6, Audi A7, Audi A6 3.0 BiTDI
4G0907589A1037524644Audi A6, Audi A6 3.0 BiTDI, Audi A6 3.0 TDI CR
4G0907589A1037526374Audi A7, Audi A6, Audi A6 3.0 BiTDI

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page