Original file

Audi A6 Bosch EDC17CP44 4G0907589B / 001

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi A6, hardware number 4G0907589B and software number 001, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A63.0 · 326.3PS / 240.0kW
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4G0907589B
Software number
001
Bosch part / software
10SW009225
Software / calibration
4G0907589F

Technical data

Vehicle
BrandAudi
Car modelA6
Engine3.0
FuelDiesel
Power326.3PS / 240.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907589B
Software number001
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key92c5c563e771b566
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW009225Offset in the file: 0x28301A
Vehicle maker's hardware number4G0907589BOffset in the file: 0x3184A0
Software / calibration4G0907589F · version 0001Offset in the file: 0x3184BA
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1249//C1249CDFA///Offset in the file: 0x284630

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907589B and software number 001. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G0907589A1037522990Audi A6, Audi A7, Audi A6 3.0 BiTDI
4G0907589A1037524644Audi A6, Audi A6 3.0 BiTDI, Audi A6 3.0 TDI CR
4G0907589A1037526374Audi A7, Audi A6, Audi A6 3.0 BiTDI
4G0907589B000164Audi Q5 S 3.0 TDI CR DPF, Audi Q5 3.0 TDI CR DPF
4G0907589B005516Audi Q5 S 3.0 TDI CR DPF
4G0907589B009225Audi A6 3.0 TDI CR, Audi A7 3.0 v6 bi tdi
4G0907589B009271Audi Q5 S 3.0 TDI CR
4G0907589B012350Audi A6 3.0 TDI CR DPF, Audi A 3.0 BiTDI

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page