Original file

Audi Q5 S 3.0 TDI CR DPF Bosch EDC17CP44 4G0907589B / 005516

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi Q5 S 3.0 TDI CR DPF, hardware number 4G0907589B and software number 005516, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q5 S 3.0 TDI CR DPF3.0 diesel 326.0PS / 239.8kW
Control unit
Bosch EDC17CP44
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
4G0907589B
Software number
005516
Bosch part / software
10SW005516
Software / calibration
8K5907589C

Technical data

Vehicle
BrandAudi
Car modelQ5 S 3.0 TDI CR DPF
Engine3.0 diesel 326.0PS / 239.8kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907589B
Software number005516
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key06f784e206cccd18
Identification read from the file
ECU nameEDC17CP44
Read typeCalibration only (data set)
Bosch part / software10SW005516Offset in the file: 0x08301A
Vehicle maker's hardware number4G0907589BOffset in the file: 0x118974
Software / calibration8K5907589C · version 0002Offset in the file: 0x11898E
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1249//C1249SF00///Offset in the file: 0x084630

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907589B and software number 005516. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G0907589A1037524644Audi A6, Audi A6 3.0 BiTDI, Audi A6 3.0 TDI CR
4G0907589A1037526374Audi A7, Audi A6, Audi A6 3.0 BiTDI
4G0907589B000164Audi Q5 S 3.0 TDI CR DPF, Audi Q5 3.0 TDI CR DPF
4G0907589B001Audi A6
4G0907589B009225Audi A6 3.0 TDI CR, Audi A7 3.0 v6 bi tdi
4G0907589B009271Audi Q5 S 3.0 TDI CR
4G0907589B012350Audi A6 3.0 TDI CR DPF, Audi A 3.0 BiTDI
4G0907589B012359Audi SQ5 3.0 V6 TDI CR

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page