Original file

Audi Q5 S 3.0 TDI CR Bosch EDC17CP44 4G0907589B / 009271

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi Q5 S 3.0 TDI CR, hardware number 4G0907589B and software number 009271, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q5 S 3.0 TDI CR3.0 diesel 326.0PS / 239.8kW
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4G0907589B
Software number
009271
Bosch part / software
10SW009271
Software / calibration
8K5907589C

Technical data

Vehicle
BrandAudi
Car modelQ5 S 3.0 TDI CR
Engine3.0 diesel 326.0PS / 239.8kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907589B
Software number009271
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key3c0b88e04f4be681
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW009271Offset in the file: 0x02001A
Vehicle maker's hardware number4G0907589BOffset in the file: 0x318974
Software / calibration8K5907589C · version 0004Offset in the file: 0x31898E
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1249//C1249SF00///Offset in the file: 0x045B10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907589B and software number 009271. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G0907589B000164Audi Q5 S 3.0 TDI CR DPF, Audi Q5 3.0 TDI CR DPF
4G0907589B001Audi A6
4G0907589B005516Audi Q5 S 3.0 TDI CR DPF
4G0907589B009225Audi A6 3.0 TDI CR, Audi A7 3.0 v6 bi tdi
4G0907589B012350Audi A6 3.0 TDI CR DPF, Audi A 3.0 BiTDI
4G0907589B012359Audi SQ5 3.0 V6 TDI CR
4G0907589B017843Audi A6 3.0 V6 TDI CR, Audi A6 3.0 TDI, Audi A6 Allroad Quattro 3.0 TDI CR DPF
4G0907589B023503Audi A6 3.0 TDI CR

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page