Original file

Audi SQ5 3.0 V6 TDI CR Bosch EDC17CP44 4G0907589B / 012359

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi SQ5 3.0 V6 TDI CR, hardware number 4G0907589B and software number 012359, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi SQ5 3.0 V6 TDI CR3.0 diesel 340.0PS / 250.1kW
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
8,192.00 KB · Flash
Hardware number
4G0907589B
Software number
012359
Bosch part / software
10SW012359
Software / calibration
8K5907589C

Technical data

Vehicle
BrandAudi
Car modelSQ5 3.0 V6 TDI CR
Engine3.0 diesel 340.0PS / 250.1kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907589B
Software number012359
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File keyaf22c77346d937f3
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW012359Offset in the file: 0x28301A
Vehicle maker's hardware number4G0907589BOffset in the file: 0x318C18
Software / calibration8K5907589C · version 0005Offset in the file: 0x318C32
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1249//C1249SF20///Offset in the file: 0x284630

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907589B and software number 012359. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G0907589B005516Audi Q5 S 3.0 TDI CR DPF
4G0907589B009225Audi A6 3.0 TDI CR, Audi A7 3.0 v6 bi tdi
4G0907589B009271Audi Q5 S 3.0 TDI CR
4G0907589B012350Audi A6 3.0 TDI CR DPF, Audi A 3.0 BiTDI
4G0907589B017843Audi A6 3.0 V6 TDI CR, Audi A6 3.0 TDI, Audi A6 Allroad Quattro 3.0 TDI CR DPF
4G0907589B023503Audi A6 3.0 TDI CR
4G0907589B035511Audi 6 3.0 BiTDI, Audi A6 3.0 BiTDI, Audi A6 3.0 TDI Competition Quattro Tiptronic - 326hp
4G0907589B037126Audi Q5 S 3.0 TDI CR, Audi Q5 S 3.0 TDI CR DPF, Audi SQ5 3.0 V6 24v TDI Quattro - 313hp

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page