Original file

Audi A6 3.0 TDI CR Bosch EDC17CP44 4G0907589B / 023503

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi A6 3.0 TDI CR, hardware number 4G0907589B and software number 023503, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A6 3.0 TDI CR3.0 diesel 326.0PS / 239.8kW
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
8,192.00 KB · Flash
Hardware number
4G0907589B
Software number
023503
Bosch part / software
10SW023503
Software / calibration
4G0907589F

Technical data

Vehicle
BrandAudi
Car modelA6 3.0 TDI CR
Engine3.0 diesel 326.0PS / 239.8kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907589B
Software number023503
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key84f7fbdfa49e31b7
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW023503Offset in the file: 0x02001A
Vehicle maker's hardware number4G0907589BOffset in the file: 0x3177B0
Software / calibration4G0907589F · version 0004Offset in the file: 0x3177CA
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1249//C1249CDG0///Offset in the file: 0x045A80

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907589B and software number 023503. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G0907589B009271Audi Q5 S 3.0 TDI CR
4G0907589B012350Audi A6 3.0 TDI CR DPF, Audi A 3.0 BiTDI
4G0907589B012359Audi SQ5 3.0 V6 TDI CR
4G0907589B017843Audi A6 3.0 V6 TDI CR, Audi A6 3.0 TDI, Audi A6 Allroad Quattro 3.0 TDI CR DPF
4G0907589B035511Audi 6 3.0 BiTDI, Audi A6 3.0 BiTDI, Audi A6 3.0 TDI Competition Quattro Tiptronic - 326hp
4G0907589B037126Audi Q5 S 3.0 TDI CR, Audi Q5 S 3.0 TDI CR DPF, Audi SQ5 3.0 V6 24v TDI Quattro - 313hp
4G0907589B079892Audi A6 3.0 BiTDI, Audi A7 3.0 Bi-TDI CR DPF, Audi A6 3.0 TDI Competition Quattro Tiptronic - 326hp
4G0907589B079965Audi SQ5 3.0 TDI CR DPF

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page