Original file

Audi Q5 S Bosch EDC17CP44 4G0907589B / 1037526335

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi Q5 S, hardware number 4G0907589B and software number 1037526335, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q5 S3.0 diesel 326PS
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4G0907589B
Software number
1037526335
Bosch part / software
10SW037126
Software / calibration
8K5907589C

Technical data

Vehicle
BrandAudi
Car modelQ5 S
Engine3.0 diesel 326PS
Power326.0PS / 239.8kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907589B
Software number1037526335
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key11fe6e72a093af36
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW037126Offset in the file: 0x02001A
Vehicle maker's hardware number4G0907589BOffset in the file: 0x318BC4
Software / calibration8K5907589C · version 0008Offset in the file: 0x318BDE
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1249//C1249SF2C///Offset in the file: 0x045B44

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907589B and software number 1037526335. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G0907589B035511Audi 6 3.0 BiTDI, Audi A6 3.0 BiTDI, Audi A6 3.0 TDI Competition Quattro Tiptronic - 326hp
4G0907589B037126Audi Q5 S 3.0 TDI CR, Audi Q5 S 3.0 TDI CR DPF, Audi SQ5 3.0 V6 24v TDI Quattro - 313hp
4G0907589B079892Audi A6 3.0 BiTDI, Audi A7 3.0 Bi-TDI CR DPF, Audi A6 3.0 TDI Competition Quattro Tiptronic - 326hp
4G0907589B079965Audi SQ5 3.0 TDI CR DPF
4G0907589B1037544192Audi A7, Audi A7 3.0 BiTDI
4G0907589B1037546811Audi A6, Audi A7 3.0 TDI CR DPF, Audi A6 3.0 Bi -TDI CR
4G0907589B1037554738Audi A6, Audi A7, Audi A6 3.0 TDI Competition Quattro Tiptronic - 326PS
4G0907589B1037555842Audi Q5 S

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page