Original file

Audi SQ5 3.0 TDI Bosch EDC17CP44 4G0907589B / 10SW009271 1249SF00

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi SQ5 3.0 TDI, hardware number 4G0907589B and software number 10SW009271 1249SF00, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi SQ5 3.0 TDI3.0 diesel 340.0PS / 250.1kW
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4G0907589B
Software number
10SW009271 1249SF00
Bosch part / software
10SW009271
Software / calibration
8K5907589C

Technical data

Vehicle
BrandAudi
Car modelSQ5 3.0 TDI
Engine3.0 diesel 340.0PS / 250.1kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907589B
Software number10SW009271 1249SF00
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keya8eeb826ca69de42
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW009271Offset in the file: 0x28301A
Vehicle maker's hardware number4G0907589BOffset in the file: 0x318974
Software / calibration8K5907589C · version 0004Offset in the file: 0x31898E
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1249//C1249SF00///Offset in the file: 0x284630

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907589B and software number 10SW009271 1249SF00. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G0907589B10SW000164Audi SQ5, Audi Q5 S, Audi Q5
4G0907589B10SW005516Audi Q5 S
4G0907589B10SW009225Audi
4G0907589B10SW009271Audi Q5 S, Audi Q5
4G0907589B10SW012350Audi A6, Audi A
4G0907589B10SW012359Audi SQ5, Audi Q5 S
4G0907589B10SW017843Audi A6, Audi A6 Allroad Quattro, Audi A7
4G0907589B10SW017843 1249CDG0Audi A6 3.0 TDI CR DPF

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page