Original file

Audi SQ5 Bosch EDC17CP44 4G0907589B / 10SW012359

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi SQ5, hardware number 4G0907589B and software number 10SW012359, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi SQ53.0 diesel 340PS
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4G0907589B
Software number
10SW012359
Software / calibration
8K5907589C

Technical data

Vehicle
BrandAudi
Car modelSQ5
Engine3.0 diesel 340PS
Power340.0PS / 250.1kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907589B
Software number10SW012359
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key2d4c10fe512d9e4a
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW012359Offset in the file: 0x02001A
Vehicle maker's hardware number4G0907589BOffset in the file: 0x318C18
Software / calibration8K5907589C · version 0005Offset in the file: 0x318C32
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1249//C1249SF20///Offset in the file: 0x045B14

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907589B and software number 10SW012359. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi Q5 SFlash4,096.00 KB€15Add to cart
Audi SQ5Flash4,096.00 KB€15Add to cart
Audi SQ5Flash4,096.00 KB€15Add to cart
Audi SQ5Flash4,096.00 KB€15Add to cart
Audi SQ5Flash4,096.00 KB€15Add to cart

All reads of 4G0907589B / 10SW012359

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G0907589B10SW009225Audi
4G0907589B10SW009271Audi Q5 S, Audi Q5
4G0907589B10SW009271 1249SF00Audi SQ5 3.0 TDI
4G0907589B10SW012350Audi A6, Audi A
4G0907589B10SW017843Audi A6, Audi A6 Allroad Quattro, Audi A7
4G0907589B10SW017843 1249CDG0Audi A6 3.0 TDI CR DPF
4G0907589B10SW023503Audi A6
4G0907589B10SW035511Audi A6, Audi A7, Audi A6 Allroad Quattro

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page