Original file

Audi pcmflash Bosch EDC17CP44 4G0907589F / 10SW009225

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi pcmflash, hardware number 4G0907589F and software number 10SW009225, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflash3.0 diesel 326PS
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4G0907589F
Software number
10SW009225
Vehicle maker's hardware number
4G0907589B

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Engine3.0 diesel 326PS
Power326.3PS / 240.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907589F
Software number10SW009225
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keya3140f9070204262
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW009225Offset in the file: 0x02001A
Vehicle maker's hardware number4G0907589BOffset in the file: 0x3184A0
Software / calibration4G0907589F · version 0001Offset in the file: 0x3184BA
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1249//C1249CDFA///Offset in the file: 0x045A78

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907589F and software number 10SW009225. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A6Flash4,160.02 KB€15Add to cart

All reads of 4G0907589F / 10SW009225

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G0907589E1037544679Audi A6, Audi A6 3.0 TDI BiTDI, Audi A6 3.0 TDI CR
4G0907589E1037556993Audi A6, Audi A6 3.0 TDI CR, Audi pcmflash
4G0907589E1037561711Audi A6, Audi A7, Audi A6 3.0 BiTDI
4G0907589F1037554738Audi A6
4G0907589F10SW012350Audi pcmflash
4G0907589F10SW017843Audi pcmflash
4G0907589F10SW023503Audi pcmflash
4G0907589F10SW035511Audi pcmflash

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page