Original file

Audi A6 Bosch EDC17CP44 4G0907589G / 4G0907589

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi A6, hardware number 4G0907589G and software number 4G0907589, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A63.0 · 313.0PS / 230.2kW
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4G0907589G
Software number
4G0907589
Bosch part / software
10SW055629

Technical data

Vehicle
BrandAudi
Car modelA6
Engine3.0
FuelDiesel
Power313.0PS / 230.2kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907589G
Software number4G0907589
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keya6660baa9ab7b90b
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW055629Offset in the file: 0x34001A
Vehicle maker's hardware number4G0907589Offset in the file: 0x3BE522
Software / calibration4G0907589G · version 0003Offset in the file: 0x3BE53C
Bosch project identifier (EPK)35/1/EDC17_CP44/5/P897//C897C0BO///Offset in the file: 0x340A14

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907589G and software number 4G0907589. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G0907589G1037528336Audi A6, Audi A6 3.0 BiTDI, Audi 3.0 BiTDI
4G0907589G1037536208Audi A6 4G VFL 3.0 BiTDI, Audi A6 3.0 BiTDI, Audi A6
4G0907589G10SW055629Audi A6, Audi A7
4G0907589G10SW055629 C897C0BOAudi A6 3.0 BiTDI, Audi A7 3.0 BiTDI
4G09973111037532819Audi A6
4G0997401A1037524695Audi A6
4G0997401A1037527031Audi A, Audi A6, Audi Q7
4G0997401A1037542217Audi A6

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page