Original file

Audi A7 Bosch EDC17CP44 4G0997401B / 10SW053614

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi A7, hardware number 4G0997401B and software number 10SW053614, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A73.0 diesel 244PS
Control unit
Bosch EDC17CP44
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
4G0997401B
Software number
10SW053614
Vehicle maker's hardware number
4G0907401

Technical data

Vehicle
BrandAudi
Car modelA7
Engine3.0 diesel 244PS
Power244.7PS / 180.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0997401B
Software number10SW053614
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyc9e4d2a4e36831ba
Identification read from the file
ECU nameEDC17CP44
Read typeCalibration only (data set)
Bosch part / software10SW053614Offset in the file: 0x14001A
Vehicle maker's hardware number4G0907401Offset in the file: 0x19C566
Software / calibration4G0997401B · version 0006Offset in the file: 0x19C580
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1071//C1071B0CH///Offset in the file: 0x140A14

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0997401B and software number 10SW053614. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi Q7Flash4,096.00 KB€15Add to cart
Audi A7Flash4,096.00 KB€15Add to cart

All reads of 4G0997401B / 10SW053614

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G0997401A10SW030819Audi A6, Audi A
4G0997401A10SW050975Audi A6, Audi A5, Audi A6 Allroad
4G0997401A4G0997401AAudi A6
4G0997401B1037525505Audi A6
4G0997401E10SW030817Audi
4G19074011037547291Audi A7 Typ 4G C7
4G190740110SW001471Audi pcmflash
4G190740110SW007663Audi pcmflash

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page