Original file

Audi Bosch EDC17CP44 4G0997401E / 10SW030817

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi, hardware number 4G0997401E and software number 10SW030817, 4,160.02 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi3.0 diesel 217PS
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,160.02 KB · Flash
Hardware number
4G0997401E
Software number
10SW030817
Vehicle maker's hardware number
4G0907401E

Technical data

Vehicle
BrandAudi
Engine3.0 diesel 217PS
Power217.5PS / 160.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0997401E
Software number10SW030817
File
File typeOriginal flash read
File size4,160.02 KB (4,259,856 bytes)
File key566a92351cf39544
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW030817Offset in the file: 0x02001A
Vehicle maker's hardware number4G0907401EOffset in the file: 0x328080
Software / calibration4G0997401E · version 0001Offset in the file: 0x32809A
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1247//C1247CDFC///Offset in the file: 0x044578

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0997401E and software number 10SW030817. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G0997401A10SW050975Audi A6, Audi A5, Audi A6 Allroad
4G0997401A4G0997401AAudi A6
4G0997401B1037525505Audi A6
4G0997401B10SW053614Audi A7, Audi Q7
4G19074011037547291Audi A7 Typ 4G C7
4G190740110SW001471Audi pcmflash
4G190740110SW007663Audi pcmflash
4G1907401C1037545695Audi A7 3.0 TDI

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page