Original file

Audi A7 3.0 TDI Bosch EDC17CP44 4G1907401C / 1037552012

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi A7 3.0 TDI, hardware number 4G1907401C and software number 1037552012, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A7 3.0 TDI3.0 diesel 244.7PS / 180.0kW
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4G1907401C
Software number
1037552012
Vehicle maker's hardware number
4G0907401

Technical data

Vehicle
BrandAudi
Car modelA7 3.0 TDI
Engine3.0 diesel 244.7PS / 180.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G1907401C
Software number1037552012
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyadd32e4c8d72fdd6
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037552012Offset in the file: 0x02001A
Vehicle maker's hardware number4G0907401Offset in the file: 0x3A063E
Software / calibration4G1907401C · version 0002Offset in the file: 0x3A0658
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1353//C1353C0M0///Offset in the file: 0x043724

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G1907401C and software number 1037552012. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G19074011037547291Audi A7 Typ 4G C7
4G190740110SW001471Audi pcmflash
4G190740110SW007663Audi pcmflash
4G1907401C1037545695Audi A7 3.0 TDI
4G1907401C10SW006003Audi pcmflash, Audi A6
4H09073111037556965Audi pcmflash
4H09074011037511950Audi pcmflash
4H09074011037518081Audi pcmflash

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page