Original file

Audi pcmflash Bosch EDC17CP44 4H0907401 / 1037518081

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi pcmflash, hardware number 4H0907401 and software number 1037518081, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflash3.0 diesel 250PS
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4H0907401
Software number
1037518081
Vehicle maker's hardware number
4G0907401

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Engine3.0 diesel 250PS
Power250.2PS / 184.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4H0907401
Software number1037518081
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key0f73c0492fda4f1c
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software1037518081Offset in the file: 0x02001A
Vehicle maker's hardware number4G0907401Offset in the file: 0x39AD00
Software / calibration4H0907401 · version 0005Offset in the file: 0x39AD1A
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1071//C1071C5WA///Offset in the file: 0x03FFB0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4H0907401 and software number 1037518081. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G1907401C1037552012Audi A7 3.0 TDI
4G1907401C10SW006003Audi pcmflash, Audi A6
4H09073111037556965Audi pcmflash
4H09074011037511950Audi pcmflash
4H09074011037522808Audi pcmflash
4H09074011037532818Audi pcmflash
4H09074011037542224Audi pcmflash
4H09074011037556964Audi pcmflash

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page