Original file

Audi pcmflash Bosch EDC17CP44 4H0907401Q / 10SW035754

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi pcmflash, hardware number 4H0907401Q and software number 10SW035754, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflash3.0 diesel 262PS
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4H0907401Q
Software number
10SW035754
Vehicle maker's hardware number
4G0907401E

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Engine3.0 diesel 262PS
Power262.4PS / 193.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4H0907401Q
Software number10SW035754
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key1f471b98153263f2
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW035754Offset in the file: 0x02001A
Vehicle maker's hardware number4G0907401EOffset in the file: 0x3263C0
Software / calibration4H0907401Q · version 0008Offset in the file: 0x3263DA
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1247//C1247CD5B///Offset in the file: 0x044380

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4H0907401Q and software number 10SW035754. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4H0907401P10SW018274Audi pcmflash
4H0907401P10SW035020Audi pcmflash
4H0907401Q10SW012939Audi pcmflash
4H0907401Q10SW018627Audi pcmflash
4H0907409AA003794Audi A8 4.2 TDI, Audi A8 4.2 TDI CR V8
4H0907409AA10SW003794Audi A8
4H0907409AA4H0907409KAudi A8
4H0907409AB003933Audi A8 4.2 TDI

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page