Original file

Audi A8 Bosch EDC17CP44 4H0907409AA / 4H0907409K

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi A8, hardware number 4H0907409AA and software number 4H0907409K, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A84.2 diesel · 384.8PS / 283.0kW
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4H0907409AA
Software number
4H0907409K
Bosch part / software
10SW003794

Technical data

Vehicle
BrandAudi
Car modelA8
Engine4.2 diesel
Power384.8PS / 283.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4H0907409AA
Software number4H0907409K
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyd15148d7f6b169c7
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW003794Offset in the file: 0x28301A
Vehicle maker's hardware number4H0907409KOffset in the file: 0x339B24
Software / calibration4H0907409AA · version 0001Offset in the file: 0x339B3E
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1234//C1234D855///Offset in the file: 0x284630

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4H0907409AA and software number 4H0907409K. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4H0907401Q10SW018627Audi pcmflash
4H0907401Q10SW035754Audi pcmflash
4H0907409AA003794Audi A8 4.2 TDI, Audi A8 4.2 TDI CR V8
4H0907409AA10SW003794Audi A8
4H0907409AB003933Audi A8 4.2 TDI
4H0907409AD009687Audi A8 4.2 TDI
4H0907409AE040217Audi A8 4.2 TDI Clean Diesel Quattro - 385hp
4H0907409AE057168Audi A7

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page