Original file

Audi A8 Bosch EDC17CP44 4H0907409AE / 10SW093446

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi A8, hardware number 4H0907409AE and software number 10SW093446, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A84.2 diesel 384PS
Control unit
Bosch EDC17CP44
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
4H0907409AE
Software number
10SW093446
Vehicle maker's hardware number
4H0907409K

Technical data

Vehicle
BrandAudi
Car modelA8
Engine4.2 diesel 384PS
Power384.8PS / 283.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4H0907409AE
Software number10SW093446
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key23ea3bb4d8a1c511
Identification read from the file
ECU nameEDC17CP44
Read typeCalibration only (data set)
Bosch part / software10SW093446Offset in the file: 0x28301A
Vehicle maker's hardware number4H0907409KOffset in the file: 0x33A334
Software / calibration4H0907409AE · version 0008Offset in the file: 0x33A34E
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1234//C1234D85E///Offset in the file: 0x284630

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4H0907409AE and software number 10SW093446. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4H0907409AE1037540454Audi A8, Audi A8 4.2 TDI Clean Diesel Quattro - 385hp, Audi A8 4.2 TDI CR V8
4H0907409AE1037540525Audi A8
4H0907409AE10SW040217Audi A8
4H0907409AE10SW057168Audi A8, Audi A7
4H0907409AE4H0907409AEAudi A8
4H0907409AE4H0907409KAudi A8
4H0907409B1037522813Audi A8, Audi A8 4.2 TDI, Audi Q7
4H0907409B1037531699Porsche Cayenne S Diesel, Porsche Cayenne S Diesel 4.2 TDI CR V8, Porsche Cayenne 4.2 TDI CR

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page