Original file

Audi A8 Bosch EDC17CP44 4H0997401A / 10SW051394

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi A8, hardware number 4H0997401A and software number 10SW051394, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A83.0 diesel 210PS
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4H0997401A
Software number
10SW051394
Vehicle maker's hardware number
4G0907401

Technical data

Vehicle
BrandAudi
Car modelA8
Engine3.0 diesel 210PS
Power210.7PS / 155.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4H0997401A
Software number10SW051394
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key48cfadd7edc55a28
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW051394Offset in the file: 0x02001A
Vehicle maker's hardware number4G0907401Offset in the file: 0x39B6C0
Software / calibration4H0997401A · version 0004Offset in the file: 0x39B6DA
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1071//C1071C5WC///Offset in the file: 0x03FFEC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4H0997401A and software number 10SW051394. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A8Flash · From the file name: L533CC04,096.00 KB€15Add to cart

All reads of 4H0997401A / 10SW051394

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4H0907409B7P5997409APorsche Cayenne
4H0907409K1037540454Audi A8, Audi A8 4.2 TDI, Audi pcmflash
4H0907409K10SW003933Audi A8
4H0907409K10SW009687Audi A8
4H0997401D10SW056387Audi A8
4L0907401C051178Volkswagen Touareg 3.0 TDI
4L0907401C055190Audi Q7 3.0 TDI
4L0907401C1037509925Audi Q7

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page