Original file

Volkswagen Touareg 3.0 TDI Bosch EDC17CP44 4L0907401C / 051178

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Volkswagen Touareg 3.0 TDI, hardware number 4L0907401C and software number 051178, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Touareg 3.0 TDI3.0 diesel 244.7PS / 180.0kW
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4L0907401C
Software number
051178
Bosch part / software
10SW051178
Software / calibration
4L0997401

Technical data

Vehicle
BrandVolkswagen
Car modelTouareg 3.0 TDI
Engine3.0 diesel 244.7PS / 180.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4L0907401C
Software number051178
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key526222f330ebe40a
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW051178Offset in the file: 0x02001A
Vehicle maker's hardware number4L0907401COffset in the file: 0x39ED72
Software / calibration4L0997401 · version 0003Offset in the file: 0x39ED8C
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)35/1/EDC17_CP44/5/P815//C815Q5OG///Offset in the file: 0x03EEEC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4L0907401C and software number 051178. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4H0907409K10SW003933Audi A8
4H0907409K10SW009687Audi A8
4H0997401A10SW051394Audi A8
4H0997401D10SW056387Audi A8
4L0907401C055190Audi Q7 3.0 TDI
4L0907401C1037509925Audi Q7
4L0907401C1037509967Audi Q7
4L0907401C1037510906Audi Q7, Audi Q7 3.0TDI, Audi Q7 3.0 TDI

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page