Original file

Audi Q7 Bosch EDC17CP44 4L0907401D / 1037510344

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi Q7, hardware number 4L0907401D and software number 1037510344, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q73.0 diesel 239PS
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4L0907401D
Software number
1037510344
Bosch part / software
10SW049558
Software / calibration
4L0997401E

Technical data

Vehicle
BrandAudi
Car modelQ7
Engine3.0 diesel 239PS
Power239.3PS / 176.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4L0907401D
Software number1037510344
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyb37184a48d9be159
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW049558Offset in the file: 0x02001A
Vehicle maker's hardware number4L0907401DOffset in the file: 0x3B63B4
Software / calibration4L0997401E · version 0001Offset in the file: 0x3B63CE
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)35/1/EDC17_CP44/5/P930//C930Q5NL///Offset in the file: 0x043334

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4L0907401D and software number 1037510344. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4L0907401C10SW055190Audi Q7
4L0907401C4L0907401CAudi Q7
4L0907401D037051Audi Q7 3.0 TDI
4L0907401D049558Audi Q7 3.0 TDI
4L0907401D1037510345Audi Q7
4L0907401D1037510981Audi Q7
4L0907401D1037514677Audi Q7, Audi Q7 3.0TDI, Audi Q7 3.0 TDI
4L0907401D1037514682Audi Q7, Audi Q7 3.0 TDI, Audi Q7 3.0TDI

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page