Original file

Audi Q7 3.0TDI Bosch EDC17CP44 4L0997401F / 10SW049380

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi Q7 3.0TDI, hardware number 4L0997401F and software number 10SW049380, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q7 3.0TDI3.0 diesel
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4L0997401F
Software number
10SW049380
Vehicle maker's hardware number
4L0907401E

Technical data

Vehicle
BrandAudi
Car modelQ7 3.0TDI
Engine3.0 diesel
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4L0997401F
Software number10SW049380
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameAudi Q7 EDC17CP44
File key1c169c0fe2b3c6b7
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW049380Offset in the file: 0x02001A
Vehicle maker's hardware number4L0907401EOffset in the file: 0x310012
Software / calibration4L0997401F · version 0002Offset in the file: 0x31002C
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1068//C1068QAFL///Offset in the file: 0x043F44

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4L0997401F and software number 10SW049380. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4L0910409M1037521087Audi pcmflash, Audi Q7
4L0910409P1037528358Audi pcmflash
4L0910409Q1037528359Audi pcmflash
4L0910409T1037536280Audi pcmflash
4L1910401H1037510906Audi
4L1910401H1037518051Audi pcmflash
4L1910401H1037532815Audi pcmflash
4L1910401H1037556983Audi pcmflash

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page