Original file

Volkswagen Bosch EDC17CP44 7P0907401F / 1037536614

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Volkswagen, hardware number 7P0907401F and software number 1037536614, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen3.0 diesel 244PS
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
7P0907401F
Software number
1037536614
Vehicle maker's hardware number
4G0907401

Technical data

Vehicle
BrandVolkswagen
Engine3.0 diesel 244PS
Power244.7PS / 180.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number7P0907401F
Software number1037536614
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key8ddedb5e8ee72a9c
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software1037536614Offset in the file: 0x02001A
Vehicle maker's hardware number4G0907401Offset in the file: 0x39BBD6
Software / calibration7P0907401F · version 0007Offset in the file: 0x39BBF0
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1071//C1071B0AL///Offset in the file: 0x04059C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 7P0907401F and software number 1037536614. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Volkswagen TouaregFlash4,096.00 KB€15Add to cart
Volkswagen TouaregFlash4,096.00 KB€15Add to cart
Volkswagen TouaregFlash4,096.00 KB€15Add to cart
Volkswagen TouaregFlash4,096.00 KB€15Add to cart
Volkswagen Touareg 3.0 TDIFlash4,096.00 KB€15Add to cart
Volkswagen pcmflashFlash4,096.00 KB€15Add to cart

All reads of 7P0907401F / 1037536614

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
7P0907401F1037518184Volkswagen Touareg, Volkswagen Toaureg 3.0tdi V6, Volkswagen pcmflash
7P0907401F1037525584Volkswagen Touareg, Volkswagen pcmflash
7P0907401F1037535387Volkswagen Touareg, Volkswagen Touareg 3.0 TDI, Volkswagen Touareg 3.0 TDI CR
7P0907401F1037536274Volkswagen pcmflash, Volkswagen Touareg
7P0907401G1037517582Volkswagen Touareg
7P0907401G1037525587Volkswagen Touareg 3.0 TDI, Volkswagen pcmflash
7P0907401G1037535393Volkswagen pcmflash, Volkswagen Touareg
7P0907401G1037536655Volkswagen pcmflash

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page