Original file

Volkswagen Touareg 3.0 TDI Bosch EDC17CP44 7P0907401K / 010098

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Volkswagen Touareg 3.0 TDI, hardware number 7P0907401K and software number 010098, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Touareg 3.0 TDI3.0 diesel 204.0PS / 150.0kW
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
7P0907401K
Software number
010098
Bosch part / software
10SW010098
Software / calibration
7P1907311A

Technical data

Vehicle
BrandVolkswagen
Car modelTouareg 3.0 TDI
Engine3.0 diesel 204.0PS / 150.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number7P0907401K
Software number010098
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyd811899f6edb2d76
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW010098Offset in the file: 0x28301A
Vehicle maker's hardware number7P0907401KOffset in the file: 0x3250E8
Software / calibration7P1907311A · version 0002Offset in the file: 0x325102
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1248//C1248TDFD///Offset in the file: 0x285418

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 7P0907401K and software number 010098. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
7P0907401J1037564453Volkswagen pcmflash
7P0907401J1037564564Volkswagen pcmflash
7P0907401K000424Porsche Cayenne Diesel 3.0 TDI CR
7P0907401K009623Volkswagen Touareg 3.0 TDI
7P0907401K022264Porsche Cayenne Diesel 3.0 TDI CR
7P0907401K028687Porsche 958 3.0 TDI EU6, Porsche Cayenne Diesel 3.0 V6 TDI, Porsche Cayenne 3.0 V6 TDI
7P0907401K028769Volkswagen Touareg 3.0 TDI CR, Volkswagen Touareg 3.0 V6 TDI 8AT - 239hp
7P0907401K028989Volkswagen Touareg 3.0 V6 TDI DPF BlueMotion

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page