Original file

Porsche 958 3.0 TDI EU6 Bosch EDC17CP44 7P0907401K / 028687

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Porsche 958 3.0 TDI EU6, hardware number 7P0907401K and software number 028687, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Porsche 958 3.0 TDI EU63.0 diesel 193 · 193
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
8,192.00 KB · Flash
Hardware number
7P0907401K
Software number
028687
Bosch part / software
10SW028687
Software / calibration
7P5907401L

Technical data

Vehicle
BrandPorsche
Car model958 3.0 TDI EU6
Engine3.0 diesel 193
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number7P0907401K
Software number028687
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File keya05fb4ea0b36fa7a
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW028687Offset in the file: 0x28301A
Vehicle maker's hardware number7P0907401KOffset in the file: 0x3250E8
Software / calibration7P5907401L · version 0009Offset in the file: 0x325102
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1248//C1248TDFD///Offset in the file: 0x285418

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 7P0907401K and software number 028687. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Porsche 958 3.0 TDI EU6Flash8,192.00 KB€15Add to cart
Porsche Cayenne Diesel 3.0 V6 TDIFlash12,288.00 KB€15Add to cart
Porsche Cayenne 3.0 V6 TDIFlash16,384.00 KB€15Add to cart

All reads of 7P0907401K / 028687

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
7P0907401K000424Porsche Cayenne Diesel 3.0 TDI CR
7P0907401K009623Volkswagen Touareg 3.0 TDI
7P0907401K010098Volkswagen Touareg 3.0 TDI
7P0907401K022264Porsche Cayenne Diesel 3.0 TDI CR
7P0907401K028769Volkswagen Touareg 3.0 TDI CR, Volkswagen Touareg 3.0 V6 TDI 8AT - 239hp
7P0907401K028989Volkswagen Touareg 3.0 V6 TDI DPF BlueMotion
7P0907401K1037526335Volkswagen Touareg
7P0907401K1037527094Volkswagen Touareg

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page