Original file

Volkswagen Bosch EDC17CP44 7P0907401K / 10SW000423

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Volkswagen, hardware number 7P0907401K and software number 10SW000423, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagendiesel
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
7P0907401K
Software number
10SW000423
Software / calibration
7P1907401C

Technical data

Vehicle
BrandVolkswagen
Enginediesel
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number7P0907401K
Software number10SW000423
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keydc8a5173d4ca8d68
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW000423Offset in the file: 0x02001A
Vehicle maker's hardware number7P0907401KOffset in the file: 0x32F758
Software / calibration7P1907401C · version 0002Offset in the file: 0x32F772
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1364//C1364TE70///Offset in the file: 0x0471C8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 7P0907401K and software number 10SW000423. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
7P0907401K1037553073Porsche Cayenne Diesel, Porsche Touareg, Porsche Cayenne
7P0907401K1037555076Volkswagen Touareg
7P0907401K1037564343Porsche Cayenne Diesel, Porsche Cayenne
7P0907401K1037564344Volkswagen pcmflash
7P0907401K10SW000424Porsche Cayenne
7P0907401K10SW001611Volkswagen Touareg
7P0907401K10SW001614Volkswagen Touareg
7P0907401K10SW009623Porsche Cayenne, Porsche Cayenne Diesel

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page