Original file

Volkswagen Bosch EDC17CP44 7P0907401K / 10SW022264

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Volkswagen, hardware number 7P0907401K and software number 10SW022264, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagendiesel · 240.0PS / 176.5kW
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
7P0907401K
Software number
10SW022264
Software / calibration
7P5997401

Technical data

Vehicle
BrandVolkswagen
Enginediesel
Displacement3.0
Power240.0PS / 176.5kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number7P0907401K
Software number10SW022264
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye98027c3b4872b2b
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW022264Offset in the file: 0x02001A
Vehicle maker's hardware number7P0907401KOffset in the file: 0x33202C
Software / calibration7P5997401 · version 0005Offset in the file: 0x332046
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1364//C1364TEAQ///Offset in the file: 0x047470

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 7P0907401K and software number 10SW022264. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Porsche Cayenne S DieselFlash4,096.00 KB€15Add to cart
Porsche PanameraFlash4,096.00 KB€15Add to cart
Porsche CayenneFlash2,048.00 KB€15Add to cart

All reads of 7P0907401K / 10SW022264

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
7P0907401K10SW009820Volkswagen Touareg
7P0907401K10SW009839Volkswagen Touareg
7P0907401K10SW010068Volkswagen Touareg
7P0907401K10SW010098Volkswagen Touareg
7P0907401K10SW025266Volkswagen
7P0907401K10SW028687Porsche Touareg, Porsche Cayenne Diesel, Porsche Cayenne
7P0907401K10SW028769Volkswagen Touareg
7P0907401K10SW028769 1248TDFDVolkswagen Touareg 3.0 TDI

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page