Original file

Volkswagen Touareg Bosch EDC17CP44 7P1997401B / 1037535387

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Volkswagen Touareg, hardware number 7P1997401B and software number 1037535387, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Touareg3.0 diesel 203PS
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
7P1997401B
Software number
1037535387
Bosch part / software
10SW067190
Vehicle maker's hardware number
4G0907401

Technical data

Vehicle
BrandVolkswagen
Car modelTouareg
Engine3.0 diesel 203PS
Power203.9PS / 150.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number7P1997401B
Software number1037535387
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyaebad52d50606a48
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW067190Offset in the file: 0x02001A
Vehicle maker's hardware number4G0907401Offset in the file: 0x22F262
Software / calibration7P1997401B · version 0006Offset in the file: 0x22F27C
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1353//C1353C0QB///Offset in the file: 0x04376C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 7P1997401B and software number 1037535387. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
7P1907401F10SW028769Volkswagen pcmflash
7P19074091037544688Volkswagen pcmflash
7P1907409A1037544687Volkswagen Touareg, Volkswagen pcmflash
7P1997401B1037518184Volkswagen Touareg
7P1997401B10SW054199Volkswagen Touareg
7P1997401B10SW067190Volkswagen Touareg, Audi
7P1997409A054484Volkswagen Touareg 4.2 TDI
7P1997409A10SW054484Volkswagen Touareg

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page