Original file

Volkswagen Touareg 4.2 TDI Bosch EDC17CP44 7P1997409A / 054484

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Volkswagen Touareg 4.2 TDI, hardware number 7P1997409A and software number 054484, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Touareg 4.2 TDI4.2 diesel 339.9PS / 250.0kW
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
8,192.00 KB · Flash
Hardware number
7P1997409A
Software number
054484
Bosch part / software
10SW054484
Vehicle maker's hardware number
7P0907409

Technical data

Vehicle
BrandVolkswagen
Car modelTouareg 4.2 TDI
Engine4.2 diesel 339.9PS / 250.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number7P1997409A
Software number054484
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key9e9a1bf0b92d915c
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW054484Offset in the file: 0x34001A
Vehicle maker's hardware number7P0907409Offset in the file: 0x205574
Software / calibration7P1997409A · version 0002Offset in the file: 0x20558E
Bosch project identifier (EPK)35/1/EDC17_CP44/5/P879//C879T51E///Offset in the file: 0x340A14

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 7P1997409A and software number 054484. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
7P1997401B1037518184Volkswagen Touareg
7P1997401B1037535387Volkswagen Touareg
7P1997401B10SW054199Volkswagen Touareg
7P1997401B10SW067190Volkswagen Touareg, Audi
7P1997409A10SW054484Volkswagen Touareg
7P59074011037510375Volkswagen pcmflash
7P59074011037526317Volkswagen pcmflash
7P5907401A1037515271Porsche Cayenne Diesel

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page