Original file

Volkswagen pcmflash Bosch EDC17CP44 7P5907401L / 10SW009623

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Volkswagen pcmflash, hardware number 7P5907401L and software number 10SW009623, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen pcmflash3.0 diesel 262PS
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
7P5907401L
Software number
10SW009623
Vehicle maker's hardware number
7P0907401K

Technical data

Vehicle
BrandVolkswagen
Car modelpcmflash
Engine3.0 diesel 262PS
Power262.4PS / 193.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number7P5907401L
Software number10SW009623
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keya422e9fafbe9ac52
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW009623Offset in the file: 0x02001A
Vehicle maker's hardware number7P0907401KOffset in the file: 0x3250E8
Software / calibration7P5907401L · version 0007Offset in the file: 0x325102
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1248//C1248TDFD///Offset in the file: 0x0436BC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 7P5907401L and software number 10SW009623. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
7P5907401H1037527095Volkswagen pcmflash
7P5907401H1037544677Volkswagen pcmflash
7P5907401K1037549329Volkswagen pcmflash, Volkswagen Cayenne Diesel, Porsche
7P5907401L1037553073Volkswagen pcmflash, Volkswagen Cayenne, Porsche
7P5907401Q10SW000424Volkswagen pcmflash
7P5907401R1037517582Volkswagen pcmflash
7P5907401R10SW004478Porsche Cayenne
7P5907409ABPorsche Cayenne

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page