Original file

Audi A5 Bosch EDC17CP44 8K5907311 / 1037519312

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi A5, hardware number 8K5907311 and software number 1037519312, 4,160.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A53.0 diesel 204PS
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,160.00 KB · Flash
Hardware number
8K5907311
Software number
1037519312
Vehicle maker's hardware number
4G0907401

Technical data

Vehicle
BrandAudi
Car modelA5
Engine3.0 diesel 204PS
Power204.0PS / 150.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number8K5907311
Software number1037519312
File
File typeOriginal flash read
File size4,160.00 KB (4,259,840 bytes)
File key8c1df1d77d863a90
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037519312Offset in the file: 0x02001A
Vehicle maker's hardware number4G0907401Offset in the file: 0x39AE3E
Software / calibration8K5907311 · version 0001Offset in the file: 0x39AE58
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1071//C1071B0AB///Offset in the file: 0x0404B8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8K5907311 and software number 1037519312. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
8K0907401E1037505901Audi A4 8K
8K0907401E1037507647Audi A4 3.0 TDI, Audi A4 3.0 TDI CR
8K0907401E1037515240Audi A4, Audi pcmflash
8K0907401E10SW056235Audi A4, Audi A6
8K59073111037532831Volkswagen pcmflash
8K59073111037556952Volkswagen pcmflash
8K5907311A1037522947Audi A4, Audi A5
8K5907311A1037544695Audi pcmflash, Audi A5

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page