Original file

Audi A5 Bosch EDC17CP44 8K5907401A / 1037519301

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi A5, hardware number 8K5907401A and software number 1037519301, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A53.0 diesel · 245.0PS / 180.2kW
Control unit
Bosch EDC17CP44
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
8K5907401A
Software number
1037519301
Vehicle maker's hardware number
4G0907401

Technical data

Vehicle
BrandAudi
Car modelA5
Engine3.0 diesel
Power245.0PS / 180.2kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number8K5907401A
Software number1037519301
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keya2cdbdc5c710b209
Identification read from the file
ECU nameEDC17CP44
Read typeCalibration only (data set)
Bosch part / software1037519301Offset in the file: 0x14001A
Vehicle maker's hardware number4G0907401Offset in the file: 0x19AE3E
Software / calibration8K5907401A · version 0001Offset in the file: 0x19AE58
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1071//C1071B0AB///Offset in the file: 0x140A14

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8K5907401A and software number 1037519301. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A5Flash4,096.00 KB€15Add to cart
Audi A5Flash4,096.00 KB€15Add to cart
Audi A5Flash4,096.00 KB€15Add to cart
Audi A5 3.0 TDI CRFlash4,096.00 KB€15Add to cart
Audi A5 3.0 TDI CR DPFFlash4,096.00 KB€15Add to cart
Audi A5 3.0 TDI CR DPFFlash4,096.00 KB€15Add to cart

All reads of 8K5907401A / 1037519301

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
8K5907311C1037561856Audi pcmflash
8K5907311C1037564066Audi pcmflash
8K59074011037544696Audi pcmflash
8K59074011037556963Audi pcmflash
8K5907401A1037521696Audi A5, Audi A4 3.0 TDI, Audi A4 3.0 TDI (245) Quattro S-Tronic -
8K5907401AA1037549269Audi Q5, Audi pcmflash
8K5907401AA1037555321Audi pcmflash, Audi A5 3.0TDI, Audi Q5
8K5907401AC10SW000018Volkswagen pcmflash

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page