Original file

Audi Q5 Bosch EDC17CP44 8K5907401AD / 10SW012761

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi Q5, hardware number 8K5907401AD and software number 10SW012761, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q53.0 diesel 258PS
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
8K5907401AD
Software number
10SW012761
Vehicle maker's hardware number
4G0907401E

Technical data

Vehicle
BrandAudi
Car modelQ5
Engine3.0 diesel 258PS
Power258.0PS / 189.8kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number8K5907401AD
Software number10SW012761
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key66c55df7af2eec02
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW012761Offset in the file: 0x02001A
Vehicle maker's hardware number4G0907401EOffset in the file: 0x328170
Software / calibration8K5907401AD · version 0005Offset in the file: 0x32818A
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1247//C1247CD68///Offset in the file: 0x044354

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8K5907401AD and software number 10SW012761. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Volkswagen pcmflashFlash4,096.00 KB€15Add to cart

All reads of 8K5907401AD / 10SW012761

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
8K5907401AC10SW052453Audi Q5
8K5907401AD1037552530Audi Q5, Audi pcmflash, Volkswagen
8K5907401AD1037556897Audi Q5, Audi A6 3.0 TDI CR DPF, Audi pcmflash
8K5907401AD10SW007232Audi Q5, Audi pcmflash, Volkswagen
8K5907401AD10SW018624Volkswagen pcmflash
8K5907401AD10SW036686Volkswagen pcmflash
8K5907401B1037522906Volkswagen pcmflash
8K5907401D1037522902Audi A4 3.0 TDI, Audi A5, Audi A4

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page