Original file

Audi A5 Bosch EDC17CP44 8K5907401E / 10SW049562

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi A5, hardware number 8K5907401E and software number 10SW049562, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A53.0 diesel 244PS
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
8K5907401E
Software number
10SW049562
Software / calibration
8K5997401A

Technical data

Vehicle
BrandAudi
Car modelA5
Engine3.0 diesel 244PS
Power244.7PS / 180.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number8K5907401E
Software number10SW049562
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key80d3cfeb42c019bc
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW049562Offset in the file: 0x02001A
Vehicle maker's hardware number8K5907401EOffset in the file: 0x30FF8E
Software / calibration8K5997401A · version 0003Offset in the file: 0x30FFA8
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1083//C1083BAFT///Offset in the file: 0x044508

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8K5907401E and software number 10SW049562. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A5Flash4,096.00 KB€15Add to cart
Audi A5Flash4,096.00 KB€15Add to cart

All reads of 8K5907401E / 10SW049562

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
8K5907401D1037522902Audi A4 3.0 TDI, Audi A5, Audi A4
8K5907401E1037522999Audi A4 3.0 TDI, Audi A4 3.0 TDI CR, Audi A5
8K5907401E1037528343Audi A7 3.0 TDI CR
8K5907401E1037556937Audi A5
8K5907401F1037526373Audi Q5, Audi Q5 3.0 TDI CR DPF, Audi Q5 3.0 TDI
8K5907401G1037528339Audi A5, Audi Q5, Audi A5 3.0 TDI CR
8K5907401G1037536215Audi A5, Audi A4, Audi A6 3.0 TDI
8K5907401G1037556942Audi A5, Audi A4, Audi A4 3.0 TDI

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page