Original file

Audi pcmflash Bosch EDC17CP44 8K5907401Q / 10SW012912

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi pcmflash, hardware number 8K5907401Q and software number 10SW012912, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflash3.0 diesel 258PS
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
8K5907401Q
Software number
10SW012912
Vehicle maker's hardware number
4G0907401E

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Engine3.0 diesel 258PS
Power258.3PS / 190.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number8K5907401Q
Software number10SW012912
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key9da644e84f9c5ef7
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW012912Offset in the file: 0x02001A
Vehicle maker's hardware number4G0907401EOffset in the file: 0x328170
Software / calibration8K5907401Q · version 0009Offset in the file: 0x32818A
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1247//C1247CD68///Offset in the file: 0x044354

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8K5907401Q and software number 10SW012912. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
8K5907401J1037564425Volkswagen pcmflash
8K5907401L1037528343Audi pcmflash, Audi A5 3.0TDI
8K5907401L1037556937Audi pcmflash
8K5907401Q10SW003148Audi pcmflash
8K5907401Q10SW018622Audi pcmflash
8K5907401Q10SW036687Audi pcmflash
8K5907401T1037556930Audi pcmflash
8K5907401T1037561895Audi pcmflash

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page