Original file

Audi Q5 S Bosch EDC17CP44 8K5907589D / 055358

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi Q5 S, hardware number 8K5907589D and software number 055358, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q5 S3.0 diesel · 312.7PS / 230.0kW
Control unit
Bosch EDC17CP44
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
8K5907589D
Software number
055358
Bosch part / software
10SW055358
Vehicle maker's hardware number
4G0907589

Technical data

Vehicle
BrandAudi
Car modelQ5 S
Engine3.0 diesel
Power312.7PS / 230.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number8K5907589D
Software number055358
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key4ed2c50a28d4757d
Identification read from the file
ECU nameEDC17CP44
Read typeCalibration only (data set)
Bosch part / software10SW055358Offset in the file: 0x14001A
Vehicle maker's hardware number4G0907589Offset in the file: 0x1CB5AA
Software / calibration8K5907589D · version 0003Offset in the file: 0x1CB5C4
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1243//C1243QBCP///Offset in the file: 0x141630

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8K5907589D and software number 055358. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi SQ5Flash4,096.00 KB€15Add to cart
Audi SQ5 3.0 BiTDIFlash8,192.00 KB€15Add to cart

All reads of 8K5907589D / 055358

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
8K5907589B10SW000164Audi pcmflash
8K5907589C10SW009271Volkswagen pcmflash
8K5907589C10SW012359Volkswagen pcmflash
8K5907589C10SW037126Volkswagen pcmflash
8K5907589D1037529246Audi SQ5 3.0 BiTDI, Audi SQ5
8K5907589D1037532835Audi
8K5907589D1037544652Audi SQ5, Audi Q5 S
8K5907589D10SW055358Audi SQ5

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page