Original file

Audi Q5 S Bosch EDC17CP44 8K5907589D / 8K5907589D

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi Q5 S, hardware number 8K5907589D and software number 8K5907589D, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q5 S3.0 diesel 313PS
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
8K5907589D
Software number
8K5907589D
Bosch part / software
10SW055358
Vehicle maker's hardware number
4G0907589

Technical data

Vehicle
BrandAudi
Car modelQ5 S
Engine3.0 diesel 313PS
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number8K5907589D
Software number8K5907589D
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keydd3c1df6d167a091
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW055358Offset in the file: 0x02001A
Vehicle maker's hardware number4G0907589Offset in the file: 0x3CB5AA
Software / calibration8K5907589D · version 0003Offset in the file: 0x3CB5C4
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1243//C1243QBCP///Offset in the file: 0x042684

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8K5907589D and software number 8K5907589D. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi Q5 SFlash4,096.00 KB€15Add to cart
Audi SQ5Flash4,096.00 KB€15Add to cart

All reads of 8K5907589D / 8K5907589D

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
8K5907589D055358Audi SQ5 3.0 BiTDI, Audi Q5 S, Audi SQ5
8K5907589D1037529246Audi SQ5 3.0 BiTDI, Audi SQ5
8K5907589D1037532835Audi
8K5907589D1037544652Audi SQ5, Audi Q5 S
8K5907589D10SW055358Audi SQ5
8K5907589D4G0907589Audi Q5 S
95B907401F1037535431Porsche Macan 3.0 TDI CR
95B907401F10SW004568Porsche Macan

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page