Original file

Porsche Macan 3.0 TDI CR Bosch EDC17CP44 95B907401F / 1037535431

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Porsche Macan 3.0 TDI CR, hardware number 95B907401F and software number 1037535431, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Porsche Macan 3.0 TDI CR3.0 diesel 245.0PS / 180.2kW
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
95B907401F
Software number
1037535431
Bosch part / software
10SW004568

Technical data

Vehicle
BrandPorsche
Car modelMacan 3.0 TDI CR
Engine3.0 diesel 245.0PS / 180.2kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number95B907401F
Software number1037535431
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyae57c90dcea7224a
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW004568Offset in the file: 0x02001A
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1353//C1353C0Q1///Offset in the file: 0x043724

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 95B907401F and software number 1037535431. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
8K5907589D055358Audi SQ5 3.0 BiTDI, Audi Q5 S, Audi SQ5
8K5907589D1037529246Audi SQ5 3.0 BiTDI, Audi SQ5
8K5907589D1037532835Audi
8K5907589D1037544652Audi SQ5, Audi Q5 S
8K5907589D10SW055358Audi SQ5
8K5907589D4G0907589Audi Q5 S
8K5907589D8K5907589DAudi Q5 S, Audi SQ5
95B907401F10SW004568Porsche Macan

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page