Original file

BMW 3 Serie - Sedan 3.0 D Bosch EDC17CP45 0000076B061800 / O_7ETL0-000036C7-013

An original (stock) flash read of the Bosch EDC17CP45 control unit, fitted in BMW 3 Serie - Sedan 3.0 D, hardware number 0000076B061800 and software number O_7ETL0-000036C7-013, 12,288.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3 Serie - Sedan 3.0 D3.0 diesel 312.7PS / 230.0kW
Control unit
Bosch EDC17CP45
Read type
Full read (boot area included)
File
12,288.00 KB · Flash
Hardware number
0000076B061800
Software number
O_7ETL0-000036C7-013

Technical data

Vehicle
BrandBMW
Car model3 Serie - Sedan 3.0 D
Engine3.0 diesel 312.7PS / 230.0kW
Control unit
Control unitBosch EDC17CP45
ECU makerBosch
Hardware number0000076B061800
Software numberO_7ETL0-000036C7-013
File
File typeOriginal flash read
File size12,288.00 KB (12,582,912 bytes)
File keyd60081ed47adc2d7
Identification read from the file
ECU nameEDC17CP45
Read typeFull read (boot area included)
Data set descriptionN57D30T1-F30N57T1_4W6A_28
Bosch project identifier (EPK)39/1/EDC17_CP45_CP49/11/P_731//VETL0///Offset in the file: 0x259B2C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP45 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0000076B061800 and software number O_7ETL0-000036C7-013. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP45

HardwareSoftwareVehicles
0000076B0618001037536182BMW 5er 535D, BMW 3 Serie - Sedan 435d
0000076B0618001037536510BMW 5er 535D
0000076B0618001037536753BMW 3 Serie - Sedan 125d
0000076B0618001037547776BMW 3 Serie - Sedan 3.0 D, BMW 5er 550D
0000076C0113141037517690BMW 5er 525D
0000076C0113141037518652BMW X3 35D
0000076C011314O_7BSK-00000C5C-066BMW 5 Serie 35D
0000076C011513O_7BUJ-00000BAA-072BMW 5 Serie - Sedan 525D

Bosch EDC17CP45 original files

The Bosch EDC17CP45 unit page