Original file

BMW X5 X5-M50d Bosch EDC17CP45 000050A8461F3A / 1037563808

An original (stock) flash read of the Bosch EDC17CP45 control unit, fitted in BMW X5 X5-M50d, hardware number 000050A8461F3A and software number 1037563808, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW X5 X5-M50ddiesel 381.0PS / 280.2kW
Control unit
Bosch EDC17CP45
Read type
Full read (boot area included)
File
8,192.00 KB · Flash
Hardware number
000050A8461F3A
Software number
1037563808

Technical data

Vehicle
BrandBMW
Car modelX5 X5-M50d
Enginediesel 381.0PS / 280.2kW
Displacement3.0
Control unit
Control unitBosch EDC17CP45
ECU makerBosch
Hardware number000050A8461F3A
Software number1037563808
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File keybd91fd92c6779523
Identification read from the file
ECU nameEDC17CP45
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037563808Offset in the file: 0x01801A
Data set descriptionN57D30S1-F15N57S1_4WW_AT
Bosch project identifier (EPK)39/1/EDC17_CP45_CP49/11/P_731//VETV1///Offset in the file: 0x25A99C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP45 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 000050A8461F3A and software number 1037563808. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP45

Bosch EDC17CP45 original files

The Bosch EDC17CP45 unit page