Original file

BMW 5er 525D Bosch EDC17CP45 000076C01080C / #DME__DDE731a#C1#DST#N57D30U0-F10_ECE_N57UL_AT#F010-10-03-500

An original (stock) flash read of the Bosch EDC17CP45 control unit, fitted in BMW 5er 525D, hardware number 000076C01080C and software number #DME__DDE731a#C1#DST#N57D30U0-F10_ECE_N57UL_AT#F010-10-03-500, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 5er 525Ddiesel 204.0PS / 150.0kW
Control unit
Bosch EDC17CP45
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
000076C01080C
Software number
#DME__DDE731a#C1#DST#N57D30U0-F10_ECE_N57UL_AT#F010-10-03-500

Technical data

Vehicle
BrandBMW
Car model5er 525D
Enginediesel 204.0PS / 150.0kW
Displacement3.0
Control unit
Control unitBosch EDC17CP45
ECU makerBosch
Hardware number000076C01080C
Software number#DME__DDE731a#C1#DST#N57D30U0-F10_ECE_N57UL_AT#F010-10-03-500
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key9c694aa0f5a6d5db
Identification read from the file
ECU nameEDC17CP45
Read typeFull read (boot area included)
Data set descriptionN57D30U0-F10_ECE_N57UL_AT
Bosch project identifier (EPK)33/1/EDC17_CP45/11/P_731//VBHC///Offset in the file: 0x300A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP45 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 000076C01080C and software number #DME__DDE731a#C1#DST#N57D30U0-F10_ECE_N57UL_AT#F010-10-03-500. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP45

HardwareSoftwareVehicles
00002F08461334O_7ETJ1-00002F08-052BMW 5er 535D
000036C746151E1037547776BMW 4er 435d
000036C74617011037547776BMW 3er 335D
000050A8461F3A1037563808BMW X5 X5-M50d
0010000076F010-17-07-425-FSBMW 5 Serie - Sedan
00200000761037532373BMW 5 Serie - Sedan
00300052291037504984BMW 5 Serie - Sedan
00300054981037532374BMW X5

Bosch EDC17CP45 original files

The Bosch EDC17CP45 unit page