Original file

BMW X5 X5-3.0D Bosch EDC17CP45 0261NGBALA / 1037507450

An original (stock) flash read of the Bosch EDC17CP45 control unit, fitted in BMW X5 X5-3.0D, hardware number 0261NGBALA and software number 1037507450, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW X5 X5-3.0D3.0 diesel 245PS
Control unit
Bosch EDC17CP45
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0261NGBALA
Software number
1037507450
Vehicle maker's hardware number
8510838

Technical data

Vehicle
BrandBMW
Car modelX5 X5-3.0D
Engine3.0 diesel 245PS
Control unit
Control unitBosch EDC17CP45
ECU makerBosch
Hardware number0261NGBALA
Software number1037507450
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyd78f0b4726be3eb7
Identification read from the file
ECU nameEDC17CP45
Read typeFull read (boot area included)
Bosch part / software1037507450Offset in the file: 0x02001A
Vehicle maker's hardware number8510838Offset in the file: 0x00FEAA
Bosch project identifier (EPK)33/1/EDC17_CP45/11/P_730//VALA///Offset in the file: 0x047150

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP45 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261NGBALA and software number 1037507450. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP45

HardwareSoftwareVehicles
0067931275F025-13-07-502-NLBMW F10
011_CB_L6O_7BPA-0000076E-052BMW 5 Serie - Sedan 530D
01300000761037547776BMW 3 Serie - Sedan
01400000761037547776BMW 3 Serie - Sedan
02810161801037504975BMW X5, BMW X6, BMW E70
02810161801037513581BMW X5, BMW X6
02810161801037515070BMW X5, BMW X6, BMW X5 X5-3.0D
02810161831037504976BMW X5 X5-4.0D, BMW E71, BMW X6

Bosch EDC17CP45 original files

The Bosch EDC17CP45 unit page